WATERPROOFING CHEMICALS

Product Details:

We are one of the trusted companies of Cico Tapecrete P-151. Our products are enormously admired in the market owing to their top features.

Cico Tapecrete P-151, popularly known as TAPECRETE, is an acrylic based Polymer Modified Cementations Flexible Composite coating system. TAPECRETE, in conjunction with cement, makes-up for the shortcomings of plain cement, particularly its poor adhesion properties, low impact strength, low flexural strength and thin section fragility. TAPECRETE Polymer enhances qualities of cement slurry/ mortar/concrete making them excellent choices for use in new constructions as well as for renovation work.

Application:

It is mixed with neat fresh cement in the ratio of 1:2 by weight. The mix has to be stirred thoroughly until smooth homogeneous slurry is obtained. Wait for 5-10 minutes to release entrapped air bubbles. Any lump found in the mix should be removed or mixed thoroughly. The mix has to be applied by brush on rendered and/or prepared surface. Two or more coats are recommended. First coat should be allowed to air dry for 5-6 hours prior to apply subsequent coat.

Curing:

After application of final coat of it, initial air drying shall be done for 2-6 hours. During this period no water is to be used for curing. In case of high temperature and low humidity combined with high wind condition, the coating shall be covered with polythene sheet to avoid rapid drying of the coating. After maximum period of 6 hours after the final application, moist curing shall be done for the next 24 hours by spraying/sprinkling of potable water on it. During this period at no point of time should the coating be left completely dry or submerged in water. Following moist curing, the coating shall be allowed to air dry for 2 days before submersion in water.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We are engaged in offering Fosroc Brushcrete, which is extremely praised in the market. Owing to high demand, professionals make these products in varied patterns.

It is a single component acrylic-based polymer when blended with cement forms a composite polymer modified cementitious waterproofing system, when used in conjunction with fibre mesh forms a tough hard wearing surface.

Advantages:

Can be applied in uniform thickness to horizontal and vertical surfaces.

Develops excellent bond to most building materials.

Improves mechanical physical properties of the coating system when used in conjunction with cement.

Reduces or prevents salt penetration into concrete.

Resistance to ultraviolet light or by chemicals ranging from mild acids to strong alkalies.

Is highly impermeable in continuous wet condition.

Is non-flammable and does not give off toxic gases, when exposed to fire.

Non-toxic

Properties :

Pot life: 20-30 min. at 30 deg C

Mixed Density of:2.1-2.2 g/cc.

Brushcrete topping Colour: White liquid

Application temperature: > 10 deg C

Bond strength with concrete:> 1N/mm2

Additional Information:

• Item Code: 0004
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Hydroproof Xtra Waterproof Chemical is single component acrylic polymer for cement based waterproof composite coating membrane.

Uses:

Provides an effective and economical method of waterproofing to concrete and masonry surfaces, by mixing with cement and application by brush.

Advantages:

Non - toxic, non-flammable and user-friendly

Provides a tough, impermeable waterproof membrane

Can be applied by brush, on horizontal and vertical surfaces

Excellent adhesion to concrete and masonry surfaces

Protects concrete and mortar from natural elements such as wind, rain, sunlight

Breathable - allows inside water vapour to escape Description Hydroproof Xtra is formulated to be mixed with cement on site or simply brush applied over concrete or masonry surfaces to provide an effective waterproof membrane.

Technical support:

Fosroc provides a technical advisory service supported by a team of specialists in the field.

Areas of application:

Below sloping screed or waterproof plaster on:

Roofs, terraces and balconies as a sandwich layer'

Pools and fountains

Reservoirs and channels

End walls subjected to rain

Storage:

Hydroproof Xtra liquid has a shelf life of 12 months,when stored

Application instructions:

Preparation: All surfaces to be treated with Hydroproof Xtra must be thoroughly cleaned by a wire brush or other mechanical means, to remove all dust, laitance or debris. The surface must also be free from oil, grease, wax or any other form of foreign matter which might affect adhesion. Spalled and deeply disintegrated concrete or mortar must be removed to a sound substrate and repaired suitably before coating.

Product Details:

Uses

Brushbond provides a seamless, waterproof coating suitable for use in water tanks, reservoirs, swimming pools, roofs and to ensure water tightness. Brushbond effectively protects against concrete decay providing a long-lasting barrier to waterborne corrosive salts and atmospheric gases. Brushbond is designed to re-face and even out variations in concrete and masonry surfaces. Brushbond effectively seals concrete masonry walls and bridges the shrinkage cracks which are static. Brushbond provides a tough and durable coating which cannot be easily damaged or worn away.

Product Details:

Cico Super is a blend of specialty active ingredients which makes concrete waterproof when there is permeability through hydrostatic pressure or capillary absorption.

Details

• Increases cohesion, reduces segregation and bleeding significantly
• Improves workability and surface finish of concrete and mortar
• Reduces efflorescence and fungus growth

Test Results

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Cico No-1 Additives is yellow coloured viscous liquid based on reactive additives and micro-particles suspension with anti-corrosive properties. This is used as an Integral Cement Waterproofing Compound for Cement Concrete and Mortar.

Uses
It is used in the construction of concrete roofs, bathrooms, sunken areas, swimming pools, basements, retaining walls, exterior plasters, etc.

Product Details:

Cico No-3 Additives is high versatile free-flowing colorless concrete additives in liquid form. It is used as quick setting cum rapid hardening admixture for concrete and plaster. This is also used as Antifreeze/deicing compound for plain concrete in sub-zero climatic conditions.

Uses

It is used in underground basement, tunnels, emergency repair and stop huge ingress of water through structures, such as swimming pool, water treatment plant, reservoir etc. CICO No.3 is also used for execution of underground waterproofing work which restricts the water ingress for final waterproofing treatment.

Features

• Easy to use versatile concrete additives.
• Very useful product for pre-cast industries.
• Very useful emergency repair in factory.
• Highly useful for stoppage of water ingress through underground structures.
• Most useful in cold weather concreting, particularly when temperature reaches below zero degree.
• Very useful for early stripping of shutters.
• Useful for sealing joints in masonry, cracks/joints in tunnels etc.
• For underground waterproofing work CICO No-3 plays a very vital role.

Application

It is diluted with water as recommended above. Before adding the diluted No.3, sand and cement is to be mixed thoroughly in dry condition and then the Cico solution is added and mixed thoroughly and quickly so as to avoid stiffening during mixing. For stopping minor leakages and dampness only cement and Cico solution are mixed thoroughly to prepare consistency and applied on the surface immediately.

Product Details:

Choksey Mastercrete M81 is a single component 100% acrylic polymer admixture specially developed to improve the properties of cementitious compositions. When it is used with combinations with standard quality of ordinary Portland cement, it enhances the mechanical properties such as bonding (adhesion) with various building materials, flexural, compression and impact strength. It improves the thin section fragility of cement when used as coating.

Features And Advantages :

Master Crete M-81 is easily mixed with cement, cures to hard, tough, weather resistant surface & bonds strongly to most of the building materials.

Master Crete M-81 can be over coated by exterior emulsion coating or cement based paints. It can be applied to a uniform thickness coating on horizontal and vertical surfaces.

Master Crete M-81 allows trapped water vapour to escape and prevents blistering and adhesion failure.

It makes cement mortars or coating compact thus preventing salt penetration into concrete.

It is unaffected by UV light and prevents discoloration of concrete and corrosion in steel due to its alkaline nature. It is resistant to water, dilute acids and alkali solutions. Coating is highly durable even in continuous contact with water.

It is non-flammable, non-hazardous, does not evolve toxic gases when exposed to fire. Non-toxic to human being. Most properties improve on ageing. Resistant to fungus and growth of micro-organism.

Typical Applications:

Waterproofing of building terrace, toilet sunken portion, basements, waterproofing of water tanks and swimming pools.

Bridge decks, traffic aprons, runway, parking garages, industrial or factory floors, balconies, mechanical rooms, side walls. etc.

Pools and foundations, reservoirs, channels dams, water tower, tunnels etc.

Sewers, silos, foundation walls, swimming pools etc.

Repairing of concrete & masonry walls- internal, external and terrace roofs by cement mortars. Protection of concrete against corrosion and efflorescence. As an additive with cement paints which improves waterproofing property, coverage by 20-25% and life of cement paint.

As a bonding agent for old concrete and new concrete.

Product Details:

Uses:

The high elasticity, excellent bond and low water permeability of Nitoproof 600 Standard make it ideal for a wide range of water/vapour proofing applications such as foundations, basements, tunnels, ground floors, suspended floors, car decks, roof terraces, balconies, patios, bridges, precincts, inspection pits, water retaining structures (not potable water), sewage works, and inverted roofs. The excellent chemical resistance of Nitoproof 600 Standard makes it particularly suitable for tanking applications in areas where aggressive ground water conditions prevail.

Advantages:

One component, ready to apply direct from the can

Liquid application means details are simplified and there are no joints in the membrane.

Highly elastic, cures to give a permanently flexible resilient barrier over a wide range of temperatures

Rapid installation significantly reduces time spent on preparatory works and detailing

Excellent adhesion, can be applied to a wide range of substrates. Continuous adhesion prevents lateral migration of water.

Impervious - outstanding barrier properties ensure protection against corrosive soil conditions

Thermally stable - irreversible chemical cure eliminates melting and flow at high temperature

Excellent resistance to oxidation and embitterment

Mechanical damage to the membrane can be easily repaired by spot application

Standard compliance:

Nitoproof 600 Standard meets the requirements of ASTM C 836-84

Description:

Nitoproof 600 Standard single component pitch modified polyurethane cures by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. It is supplied in a single grade to meet all site application methods and requirements.

Nitoproof 600 Standard is a medium viscosity grade for roller, squeegee or spray application to horizontal and vertical surfaces.

Limitations:

Application should not commence if the temperature of the substrate is below 5 DegreeC.

Technical support:

Fosroc offers a comprehensive range of high performance, high-quality repair, maintenance and construction products. In addition, Fosroc offers a technical support package to specifiers, end-users and contractors, as well as on-site technical assistance in locations all over the world.

Precautions:

Health and safety:

Some people are sensitive to resin systems. Gloves and a barrier cream such as Kerodex Antisolvent, Rozalex Antipaint or Debba-Wet-Work should be used when handling these products. If contact with the resin occurs it must be removed before it hardens with a resin removing cream such as kerocleanse Standard grade Skin cleanser or Rozaklens Industrial Skin Cleanser. Follow by washing with soap and water. Do not use solvent. The use of goggles is recommended but should accidental eye contamination occur, wash thoroughly with plenty of water and seek medical advice. Ensure adequate ventilation

Product Details:

Brushbond TGP is crystalline capillary waterproofing system for cementitious substrates.

Uses:

• Brushbond TGP crystalline waterproofing system is used for waterproofing against the positive or negative sides of hydrostatic heads of water, for damp proofing, repairing cracks, plugging holes, sealing wall-floor joints and stopping active leaks in a wide variety of conditions including:
• Sewage treatment and water treatment plants, tanks, foundations, tunnels and manholes.
• Terrace garden, balconies, sunshades etc.
• Roof and Sunken slabs
• Industrial and offi ce buildings
• Reservoirs, water holding structures etc.

Advantages:

• Meets the requirements as per ANSI/NSF Std 61 for suitability to potable water
• Penetrates concrete, seals capillary tracts
• Contains no chloride
• Easy to apply
• Resists chemical attack of sewage and industrial wastes
• Suitable for external and internal applications.

Description:

• Brushbond TGP crystalline capillary waterproofing system contains proprietary blend of Portland cement, quartz aggregate and special chemicals. In the presence of moisture, the active chemicals in Brushbond TGP crystalline waterproofing system penetrates concrete and react chemically with free lime to produce insoluble crystals. This crystalline growth reduces porosity by blocking capillaries and filling hairline non-structural cracks ( up to 0.25mm wide) caused by shrinkage or expansion.
• Unlike metallic and membrane types of waterproofing which only form a surface barrier, Brushbond TGP crystalline waterproofing system, in the presence of water, continues producing.

Mixing:

• For best results, clean, potable water should be added to Brushbond TGP crystalline waterproofing system concentrate.

Application:

• Existing concrete: 3 parts of powder shall be added to 1 part of clean and mixed thoroughly with a slow speed drill equipped with a paddle. For larger batches, mixing shall be done with a mortar mixer. Do not mix more material than can be used in 20 minutes @27 deg C, 50% R.H. If mixture thickens, it shall be restirred to reduce consistency. Extra water should not be added.
• Curing and Protecting: Brushbond TGP crystalline waterproofing system application must be kept moist for a minimum of 48 hours. After initial set, moist curing, using continuous water spray is recommended. Treated surfaces shall be fog sprayed 3 to 4 times daily for the 48 hour period. For warmer climates, more frequent spraying may be required. It is important to keep the Brushbond TGP* crystalline waterproofing system moist to allow the crystal formation to occur. The surfaces shall be protected from foot traffic for 48 hours or heavy traffic for 7 days. Freshly applied Brushbond TGP crystalline waterproofing system must be protected from extreme weather conditions such as rain, strong winds, high temperatures and freezing for a period of not less

Storage:

• Brushbond TGP crystalline waterproofing system concentrate should be stored in protected, dry areas. When left in original unopened package, Brushbond TGP crystalline waterproofing system will maintain its design performance characteristics for 1 year.

Precautions:
Health & Safety Instructions:

• Brushbond TGP crystalline waterproofing system contain chemicals that may cause irritation to the eyes and skin. Goggles, rubber gloves and long sleeves should be worn when working with these products. Read warnings noted on product package and refer to product material safety datasheet prior to use.

Product Details:

Fosroc Proofex Engage is preapplied waterproofing membrane conforming to the requirements of BS EN 13967:2004 and BS8102:2009. Freshly poured concrete mechanically bonds to the Proofex Engage, remaining in place if settlement of substrate occurs

Uses:

• Waterproofing and gas-proofing membrane for concrete basements, lift pits, carparks and other water excluding structures. Proofex Engage can be used to achieve waterproofing to Grades 1,2 and 3 as defined in BS 8102: 2009

Advantages:

• Smart anti-tracking design prevents water tracking between membrane and concrete
• Simple and quick to install - no protection film to remove
• Basement waterproofing protection to grades 1,2 and 3 as defined in BS 5102:2009
• Methane and CO, protection as defined in BRE Report 212
• Radon protection as defined in BRE Report 211
• BBA certification
• Protects concrete from attack from chemicals, hydrocarbons and aggressive ground salts in contaminated sites
• Simple application - requires no primer or protection, and blinding concrete may be eliminated
• Inert product - no risk of a reaction with ponded water prior to concrete being poured
• Membrane composition gives excellent flexibility for detailing, combined with high durability and toughness for site trafficking.
• Unique mesh system allowing fresh concrete to
  mechanically bond

Description:

• Proofex Engage is a unique patented waterproof membrane system comprising a cell mesh bonded to a blended polyethylene/polypropylene membrane which allows poured concrete to interlock, forming a tenacious mechanical bond.
• Proofex Engage provides water, water vapour and gas protection to water excluding structures and protects concrete from aggressive ground salts, chemicals and hydrocarbons. Proofex Engage is supplied with a self-adhesive selvage along one side of the roll to provide sealed laps and a comprehensive range of auxiliary products to simplify the application process.

Standard compliance:

• Independently certified performance, BBA certificate ( N o . 03/4042).
• BS EN 13967:2004- Flexible sheets for waterproofing- Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Type A and Type T

Storage:

• Store in original unopened packaging, in cool dry conditions, away from sunlight, in a flat position.

Properties:

Product Details:

Uses:

• Horizontal and vertical damp-proof membranes in sandwich construction for floors, walls and roofs. Internal lining of water storage tanks including for potable water. External treatment of below ground structures against water ingress and attack by aggressive ground water.

Advantages:

• Easy to use: Simple brush or trowel application
• Cold applied: No heating or dangerous handling
• Liquid membranes: Can be applied to rough or contoured surfaces.
• No joints: Continuous unbroken film
• Non toxic: Safe with drinking water.